1
MACHINE
Vibatory Finishing M/C
Vibatory Separator Finishing
M/C
Seperator M/C
Centrifuge M/C
Dryer M/C
Rotary Barrel M/C
2
MEDIA
Grinding / Fine Finishing
3
CHEMICAL
Liquid Compound
Powder Compound
Chemical Solid
Chemical Solution
4
SUCTION  BLAST
MACHINE
SBM 550
SBM 800/1000/1200
PRESSURE BLAST MACHINE
Perssure Blasting Pot
120/300/600
BLASSTING EQUIPMENT
Blasting Equipment
5.
 ABRASIVE BLASTING
MEDIA
Black Siilcon Cabide
Green Siilcon Cabide
White Aluminium Oxide
Brown Aluminium Oxide
Zirconia Aluminium Oxide
Ceramic Beads
Plastic Abrasive
Glass Beads
Steel Grit
Steel Shot
Zinc Shot
Stainless Steel Shott
Stainless Steel Grit
Carbon Steel Cut Wire
Stainless Steel Cut Wire
Aluminium Cut Wire
Copper Cut Wire
Round Cut Wire
Zinc Cut Wire
Copper Shot
Copper Slag
Corn Cob
Garnet
Poly Carbonate
Nanko Emery AE
Tosa Emery Extra
6.
ACCESSORIES
Ceramic Nozzle
Pressure Blast Nozzle
Blasting Gun
Sand Blasting Gloves
7.
OTHER
Rubber Linings
Cutting Oil
Etc.
   CERAMIC BEADS
 
CONTENT AND FIELD OF APPLICATION
     This technical specification defines the quality of
impact surface treatment.
     It defines:-size ranges,
        - physical-chemical characteristics.
        - control criteria,
        - control methods,
        - control tolerances,
DEFINITIONS
     This term applies to the beads manufactured by fusion
of mineral oxides.
     Beads are designated by the letter "B" followed by
a number which depends on the size range
SIZE RANGS    
     The present document refers exclusively to the size ranges listed below, It may be possible to supply other
size ranges, the specfications of which will be subjected to an agreement between the customer and the
supplier.
DISIGNATION
SIZE RANGE
DESIGNATION
ACCORDING TO NFL06-824
B20
600 to 850 µm
Ceramic beads 700
B30
425 to 600 µm
Ceramic beads 500
B40
250 to 425 µm
Ceramic beads 300
B60
125 to 250 µm
Ceramic beads 200
B120
63 to 125 µm
Ceramic beads 100
B125
< to 125 µm
 
B205
< to 63 µm
 
TYPICAL CHEMICAL ANALYSIS:
A chemical analysis by X-ray fluorescence on samply taken from the melt
 
ZrO2
60 to 70%
 
SiO2
28 to 33%
 
Al2O3
<10%
     
     
 
    © 2007-2008   P.M. Chemical & Service Co.,Ltd.   All rights reserved.
Head Office : Tel. +662 906 5946-8   Fax +662 906 5949