1
MACHINE
Vibatory Finishing M/C
Vibatory Separator Finishing
M/C
Seperator M/C
Centrifuge M/C
Dryer M/C
Rotary Barrel M/C
2
MEDIA
Grinding / Fine Finishing
3
CHEMICAL
Liquid Compound
Powder Compound
Chemical Solid
Chemical Solution
4
SUCTION  BLAST
MACHINE
SBM 550
SBM 800/1000/1200
PRESSURE BLAST MACHINE
Perssure Blasting Pot
120/300/600
BLASSTING EQUIPMENT
Blasting Equipment
5.
 ABRASIVE BLASTING
MEDIA
Black Siilcon Cabide
Green Siilcon Cabide
White Aluminium Oxide
Brown Aluminium Oxide
Zirconia Aluminium Oxide
Ceramic Beads
Plastic Abrasive
Glass Beads
Steel Grit
Steel Shot
Zinc Shot
Stainless Steel Shott
Stainless Steel Grit
Carbon Steel Cut Wire
Stainless Steel Cut Wire
Aluminium Cut Wire
Copper Cut Wire
Round Cut Wire
Zinc Cut Wire
Copper Shot
Copper Slag
Corn Cob
Garnet
Poly Carbonate
Nanko Emery AE
Tosa Emery Extra
6.
ACCESSORIES
Ceramic Nozzle
Pressure Blast Nozzle
Blasting Gun
Sand Blasting Gloves
7.
OTHER
Rubber Linings
Cutting Oil
Etc.
   BLACK SILICON CARBIDE
 
BLACK SILICON CARBIDE
Black Silicon Carbide is produced at high temperature
in an electric resistance type fumace with quarts sand and
petroleum coke as its main raw materials. It hardness is
between fused alumina and synthetic diamond. Mechanical
intensity of it is higher than fused alumina. It is brittle and
sharp and has electrical and heat conductivity in some
degree. The abrasives made of it are suitable for working
on cast iron, non- ferrous metal, rock, leather, rubber, etc.
It is also broadly used as refractory material and
metallurgical additive.
APPLICATIONS
Black Silicon Carbide is used for cleaning extremely hard surfaces such as tungsten carbide or in cases whereby a deep
cutting action is required to remove a thick layer of material such as stone cutting or carving.
 
TYPICAL CHEMICAL ANALYSIS:
  Crystalline Sic 98.10%
  SiO2 0.50%
  Fe2O3 0.12%
  Free Si 0.25%
  Free C 0.13%
  Other Oxides 0.30%
SPECIFICATIONS :
SIZE NUMBER
MICRON
 
 
16
1180
 
 
20
850
 
 
24
740
 
 
36
480
 
 
46
326
 
 
60
250
 
 
80
180
 
 
100
150
 
 
120
125
 
 
150
100
 
 
180
83
 
 
220
68
 
PHYSICAL PROPERTIES:
Density
   : 3.2 g/cm3
Hardness
   :    9 MOH
 
    © 2007-2008   P.M. Chemical & Service Co.,Ltd.   All rights reserved.
Head Office : Tel. +662 906 5946-8   Fax +662 906 5949